BendPak XPR-9S Dual-Width Floorplate Chain-Over Two Post Short Car Lift - New Gray
The XPR-9S two-post lift offers automotive service professionals unparalleled lifting performance and lasting quality. State-of-the-art technology, top-notch materials, a forward-looking design and a 9,000-lb. lifting capacity make this lift a fantastic purchase.
XPR-9S Two-Post Car Lift is Perfect for Cars, Trucks and SUVs
The XPR-9S two-post lift is designed for pros and hobbyists alike. Powerful and secure, this lift is CE Certified and meets or exceeds the standards prescribed by European Standard EN 1493. It features an incredibly rapid lifting speed and robust menu of features to increase efficiency and productivity, all with fewer serviceable parts and reduced maintenance. The results are lower operating expenses and higher productivity. If you’re looking to do more in less time than ever before, this model is the perfect addition to your shop.
These two-post lift models have the capacity to effortlessly lift full-size pickups and commercial vehicles, yet they still provide specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9S is a rugged, open-top model with a 9,000-lb. maximum capacity, making it perfect for garages with low ceilings. When it comes to ease-of-use, our dual-synchro equalization system and user-friendly controls are the stuff of legend.
BendPak is committed to manufacturing the highest quality lifts on the market, which is why our engineers ensure that our lifts are designed, built and tested above OSHA/ALI/ETL standards. The crucial features you see on the XPR-9S are also seen in our heavy-duty truck lift models.
Two-stage telescoping screw pad assembly kit
The XPR-9S two-post lift utilizes our double-telescoping screw pads. These pads are resistant to tearing and gouging. Their thick, rugged construction ensures safe operation when used in your workplace. 63 mm stackable adapters are included as a standard set to accompany each lift, helping reach the lifting points on any vehicle.
Low-profile, dropped-end frame contact pads
From race cars to lowered compact vehicles, this lift has the versatility to get under your chassis without damaging your vehicle’s body or frame.
Triple-telescoping front arms and two-stage rear arms
Multi-stage arms are versatile enough to handle whatever you need lifted. The arm sweep and minimum arm reach on this lift are extended, so the arms can lift vehicles with unibody construction. They precisely touch OEM-recommended lift points, accommodating wide and narrow wheelbases.
Lowered arm tube supports
Our tube arms have be reconfigured to make it easier to open doors when vehicle lift points are engaged by the lift. This is especially useful if your vehicle has low-hanging doors. We take every measure to prevent damage to your property with our two-post lift design.
Automatic arm restraints
The XPR-9S two-post lift features an automatic engage/disengage arm restrain feature that engages when the lift is raised and disengages when it lowers. When lowered, the lift arms are easy to position under your vehicle chassis.
Taller lift carriages
Lift carriages are the lifting assemblies that the arms attach to. At 53", BendPak lift carriages are taller than most of our competitors’ carriages, which enables us to reduce column and load bearing stress.
Maintenance-free load bearings
BendPak uses UHMW (ultra-high molecular weight polyethylene) load bearings because they are resistant to chemicals, weather, wear, etc. and will never need to be replaced as long as you own your lift. Other companies use roller bearings that require lubrication. UHMW load bearings never need to be lubricated or maintained.
Single-piece columns
A single column structure reduces fatigue when heavy loads are applied. They are also stronger than multi-piece column designs.
Single-point safety release
The XPR-9S utilizes “dead man” style controls. Unlike what the name seems to suggest, this control style features a single point safety release and makes lift operation safer.
On the level
Two-post lift operators are provided with a dual-synchro equalization system to maintain level lifting and create a safe operating environment.
Industrial-grade hydraulic cylinders
A single-piece, pilot-fitted machined steel piston is built into every XPR-9S two-post lift. The piston is built into every hydraulic cylinder and includes pressure-loaded U-cup piston seal, backups and wear bands that prevent fluid from leaking over the piston. The chrome piston rod itself is micro-smooth and machined from high-yield C-1045/50 micro-alloy steel that is ground and expertly polished to a diametric minimum of .001". This supports a longer cylinder lifespan.
In fact, BendPak designs its car lifts with high-durometer and mechanically loaded rod seals, so the rods never leak. Urethane rod wipers are resistant to abrasion and offer total exclusion protection. The welded cylinder is constructed from strong steel tubing that easily exceeds ASTM specifications for certification. By offering a solid base in addition to high-quality processing, BendPak ensures that your two-post lift will be straight, smooth and durable for many years to come.
High-speed hydraulics
Our hydraulic lines are 3/8" thick, and the high-pressure flow pump comes with a built-on AC power unit that allows operators to manage the car lift's rise and descent speeds.
Features
- 9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Shorter column for low-ceiling installations
- Extended rise gives you over 6 feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20" x 19" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
Capacity
Lifting Capacity*9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle4,500 lbs. (2,041 kg)Rise
A - Rise:72" (1,829 mm)
B - Rise + Pad Only:78" (1,981 mm)
C - Rise + Pad + 63 mm Adapter:80.5" (2,045 mm)
D - Min. Height + Pad:4.25" (108 mm)
Time to Full Rise:45 seconds
Outside Dimensions
E - Height Overall:113" (2,870 mm)
F - Width Overall:132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns:126.75" (3,219 mm) or 139.75" (3,550 mm)
Inside Dimensions
H - Inside Columns:105" (2,667 mm) or 118" (2,997 mm)
I - Drive-Thru Clearance:93" (2,362 mm) or 106" (2,692 mm)
Arms & Pads
K - Front Arm Reach: (MIN)27.5" (699 mm)
K - Front Arm Reach: (MAX)51.5" (1,308 mm)
L - Rear Arm Reach: (MIN)34" (864 mm)
L - Rear Arm Reach: (MAX)54.5" (1,384 mm)
Screw Pad Adjustment:1.75" (44 mm)
Max Load Per Arm2,250 lbs. (1,021 kg)
Floorplate
L - Height:1.75" (44 mm)
M - Width:8.5" (216 mm)
Power Unit
Motor:220 VAC / 60 Hz. 1Ph.
Noise:45 dB
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list.
The XPR-9S features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters included as standard accessories.
This two-post model has the capacity to effortlessly lift some of your largest full-sized pickups and commercial vehicles, yet it still provides specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9S car lift is a rugged, open-top model lift with a 9,000-lb. maximum capacity. And when it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legends. Some other BendPak XPR-Series exclusives include: 16 individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversized 5” cable sheaves. And, to better cater to your specific lifting needs, we offer optional specialty arm configurations.
The entire XPR-Series is a reflection of BendPak’s continuing commitment to producing lifts of highest quality, safety and utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to safety standards well above normal OSHA/ALI/ETL requirements. The XPR-Series car lifts include a wealth of standard and optional features to support the operator's need for performance and security. Combined with BendPak’s tradition durable construction, the XPR-Series has become the new industry benchmark that others are judged by.
Whatever your specific automotive project requirements are, there's a BendPak XPR-Series 2-Post Car Lift designed to meet your needs. The XPR-Series is designed around an abundant roster of options and accessories that allow you to fully tailor your auto lift to your unique circumstance. But long before you start looking at options, you'll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series Car Lift.
Bottom line—when you buy BendPak, you can expect a significant boost in performance and lift operation life expectancy because your BendPak XPR-9S is built to be the last lift you ever purchase. No one surpasses us in quality and safety—not now, not ever. That’s why when you get a BendPak car lift; you get more than just a great lift. You get peace of mind. That’s the benefit of owning a BendPak.
Getting the right lift for your application is easy with the help of your local BendPak dealer or by investigating the customer-focused product materials found on our website.
Every XPR-9S two-post car lift comes with:
Low-profile, dropped-end frame contact pads
Squeeze under even the lowest compact and sport vehicles.
Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM recommended pick-up points and wide and / or narrow wheelbase configurations.
Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.
Automatic arm restraints
Each lifting arm is equipped with durable lift arm restraints that automatically engage each time the lift is raised. When the two-post auto lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.
Taller lift carriages
Take a close look at our two-post car lift carriages (the lifting assembly that the arms are attached to). Now take a look at the competition. You’ll notice our 53” tall carriages are considerably taller than most, which minimizes the stress placed on the load bearings and columns.
Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.
Single-piece columns
We specifically manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space.
Single-point safety release
The single point safety release and “dead man” style operation controls make every one of our XPR-Series Car & Truck Lifts easy to operate and safe to use.
On the level
Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.
Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001” diametrically, ensuring superior cylinder operation and life. The superior high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.
High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.
Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.
Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.
- S9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
- Shorter column for low-ceiling installations
- Adjust able wide or narrow drive-thru configurations
- Extended rise gives you over 6-feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20" x 19" steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
- 4-piece 63 mm stackable adapter set comes standard
MODELXPR-9SLifting Capacity*9,000 lbs. / 4082 kg
Specs
*Max Capacity / Front Axle4,500 lbs. / 2041 kg
*Max Capacity / Rear Axle4,500 lbs. / 2041 kg
A - Height Overall:113" / 2,870 mm.
B - Width Overall: (NARROW)132" / 3,353 mm.
B - Width Overall: (WIDE)145" / 3,683 mm.
C - Width Outside of Columns: (NARROW)126-3/4" / 3,225 mm.
C - Width Outside of Columns: (WIDE)139-3/4" / 3,555 mm.
D - Floor Pan Height:1-3/4" / 44 mm.
E - Inside Columns: (NARROW)105" / 2,667 mm.
E - Inside Columns: (WIDE)118" / 2,997 mm.
F - Reach (Front Arm Min.):27-1/2" / 698 mm.
G - Reach (Front Arm Max.):51-1/2" / 1308 mm.
H - Reach (Rear Arm Min.):34" / 863 mm.
I - Reach (Rear Arm Max.):54-1/2" / 1,384 mm.
J - Min. Pad Height:4" / 102 mm.
K - Rise:69" / 1,753 mm.
L - Max Lift Height (Pad Only):73" - 75" / 1,854 - 1,905 mm.
M - Max Lift Height (3" Adapter):75.5" - 77.5" / 1,917 mm. - 1,968 mm.
N - Drive-Thru Clearance: (NARROW)93" / 2,362 mm.
N - Drive-Thru Clearance: (WIDE)106" / 2,692 mm.
Screw Pad Adjustment:2" / 51 mm.
Motor (**)220 VAC / 60 Hz. 1Ph.
Time of full Rise:45 Seconds
Max Load Per Arm:2,250 Lbs. / 1,021 kg.
| arm_reach_compare_xpr_vs_xpr-lp.pdf |
