|
|
|
TOP SELLERS
Bendpak HD-9 9,000-lb. maximum lifting capacity
|
Bendpak XPR-10AS
|
Bendpak XPR-9S-LP
|
POPULAR PRODUCTS
Bendpak MD-6XP 6,000-lb. Capacity / Mid-Rise Frame Lift / Portable
You haven’t experienced state-of-the-art portable lifting convenience until you’ve used the BendPak MD-6XP mid-rise scissor lift. This 6,000-lb. capable car lift comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters. Let the MD-6XP car lift take your service capabilities to new heights.
Middle-of-the-Road Height, Top-of-the-Line Design
When it’s time to add some much needed versatility and productivity to your professional shop or home garage, your first stop should always be a BendPak car lift. Our 6,000-lb. capacity mid-rise scissor lift is designed to fit nicely into narrower bays and won’t take up much of your precious floor space. Thanks to its small footprint, even shops that don’t suffer from small work areas will benefit from its ability to be placed just about anywhere without getting in the way. This state-of-the-art scissor lift comes well-equipped with adjustable arm assemblies and an all-important multi-position safety lock bar to give your lifting jobs the dynamic flexibility necessary for the best possible result.
Easily and reliably adjust your lift to any secure position.
The true benefit of the mid-rise lift series, however, is their portability. Each car lift features a portable power unit and cart, so wherever you need to work is where your mid-rise lift will be. And since they are designed specifically to engage a vehicle’s frame, the mid-rise lift offers a seamless lifting experience. Your BendPak comes with a free set of truck adapters. It’s just another way that BendPak maximizes your garage's full potential. You can always trust BendPak for increased durability, safety and productivity.
Solid steel-frame support bars
Four support bars make this the strongest mid-rise lift in its class. Easily and safely perform wheel and brake service while finding easy access to your vehicle’s suspension. This is an ideal lift to quickly raise vehicles and work on most components. The MD-6XP is also great for detailing vehicles at a
more comfortable height.
Dual master hydraulic cylinder
A hydraulic cylinder with a built-in flow divider ensures a safe, even rise and descent with every use. This is important—even single-platform lifts require an equal balance of pressure to prevent vehicle tipping and ensure weight is evenly applied across the lift platform.
Powerful safety lock bars
Safety arms engage automatically during ascent, a crucial safety feature that essentially makes lift failure impossible. The safety arms are over-engineered to withstand worst-case emergency situations. Even if you lose complete hydraulic fluid pressure due to a leak or hose rupture, mechanical safety locks ensure the platform won’t won’t budge an inch.
Convenient stainless-steel pneumatic cylinders
Rather than fit our mid-rise lift with bulkier spring releases, we’ve installed lighter air cylinders that simultaneously release the safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 PSI, 10-CFM air source at time of installation.) The cylinders are easy to maintain and provide an absolutely safe and controlled descent with each use.
A push-button safety lock release system
Operator controls are located away from the lift and allow safe deactivation of the locks without the need to push or pull cumbersome release bars or lock release handles. The lift functionality is already perfected by our engineers. For your convenience, all you need to do is press the Down button, and watch as the platform fully descends in seconds flat. We couldn’t have made it any easier.
Hinge-point features Zerk grease fittings
Our Zerk fittings feed lubrication at critical wear areas, which is essential for not only the longevity of your lift, but the low-maintenance guarantee that we built our reputation on. Your mid-rise lift won’t need much service for the many years you will own it.
Durable, cushioned rubber contact blocks
Durable rubber blocks come standard with this car lift. They’re not like the rubber blocks and flimsy rubber pads you’re accustomed to seeing: these blocks are robust, textured for better hold and safe to use on virtually every vehicle type.
Multiple locking positions
More lock positioning gives technicians the ability to work at different working heights. Plus, if you’re detailing or doing wheel service, the full extension may not be preferable. Whatever height you prefer, this lift offers increased vehicle access without sacrificing portability.
Detailed installation and maintenance instructions
Included with every lift are graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines. We highly recommend you learn the safety features, warnings, do’s, don’ts, etc. FRONT-TO-BACK before installing or operating your mid-rise lift.
NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick-up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.
Features
- 6,000-lb. lifting capacity
- Perfect for servicing light-duty trucks and cars
- Portable motor cart serves as tow handle to easily move lift from bay to bay
- Adjustable arm assemblies
- Safety lock bar with multiple lock positions
- Fast and efficient operation
- Truck adapters included free of charge
Specifications
- Lifting capacity:6,000 lbs. (2,724 kg)
- Lifting height without adapters:48" (1,219 mm)
- Lowered height:4.75" (121 mm)
- Lifting time:45 sec
- Motor:115/208-230 VAC / 50-60 Hz / 1Ph
- Shipping weight:852 lbs. (387 kg)
- Shipping dimensions:84" x 41" x 27" (2,134 mm x 1,041 mm x 686 mm)
Bendpak SP-7XL 7,000-lb. Capacity, Scissors, Frame Engaging
The Full-Rise Scissor Lift with Collapsible Frames
The SP-7XL is a brilliant design for full-service auto shops, quick-lube pits and anyone who regularly services vehicles without much room to spare. If you need more overhead space for you and your techs, the full-rise SP-7XL might be the perfect scissor lift for you. A flush-mount option, the SP-7XLF, is also available.
No cross member
The SP-7XL is installed and mounted on your flooring without a cross member. This makes for a true open-center design that provides access to all critical undercarriage areas without requiring operators to awkwardly stoop or crawl across the floor. Reinforced steel at the base and along the top of the runways help provide a stable lift that completely eliminates the need for a cross member or additional structural support.
Large base frame
Heavy boxed-steel formed base frame provides excellent stability. Your vehicle should glide smoothly up and down, not rock haphazardly side-to-side. Our sturdy, expanded base guarantees a safe, stable lift.
Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Dual master hydraulic cylinder
The SP-7XL car lift features two redesigned, extra-large hydraulic cylinders with integrated flow restrictors that control descent, even in the extremely rare instance of a serious hydraulic fluid leak or hose rupture. Two cylinders, one to pressurize each frame, ensure a balanced rise with every lift application.
Pneumatic safety locks
A single convenient operator stand allows you to release the pneumatic safety locks from a safe distance without ever worrying about manually lifting release arms or latches. The locks disengage when the lift lowers and automatically, and multiple locking positions provide operators with more service options. The locks engage or disengage at each position seamlessly with the movement of the scissor lift frames.
Hardened pivot pins with Zerk fittings
Our "Zerk" grease fittings lubricate essential wear areas, important for keeping the rise and descent action of the lift smooth and safe, as well as preventing damage to the structure of your car lift. Minor weekly and monthly maintenance tasks will keep your scissor lift functioning for years to come.
Durable, cushioned rubber contact blocks
Four robust rubber blocks come standard with each full-rise lift purchase. Since our scissor lifts, like many others, engage the vehicle frame, it’s essential that the contact point is well-constructed. This comes as an after-thought to many car lift manufacturers, but not us. Our blocks are sturdy, thick and textured at the point of contact, so they never slip off the lift point when properly placed.
Detailed installation and maintenance instructions
Your full-rise lift comes with graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines. Review and familiarize yourself with every safety feature, warning, do’s and don’ts. Read the manual in its entirety before installing your car lift or (if you had it professionally installed) attempting to operate it.
Choose Flush-Mount
The SP-7XLF is the flush-mount version of our full-rise scissor lift. If your garage has a recessed area of concrete designed to hold flush-mount lifts, you’ll be pleased by how "invisible" this lift is in your garage. When it’s collapsed, you’re free to drive over it and work around it without tripping on wires or cables. We’re proud that the collapsed SP-7XLF is extremely low-profile, but if you want to take low to virtually zero, the flush-mount version of this model is the perfect car lift solution for your garage.
Features & Specs
- 7,000-lb. lifting capacity
- Pneumatic safety locks
- Hardened pivot pins with "Zerk" fittings
- Open-center design
- Ergonomic controls
- Dual-cylinder hydraulic design provides extra power
- Low-profile
- Surface-mount
Specifications:
Lifting capacity:7,000 lbs. (3,175 kg)
Max height raised:70" (1,781 mm)
Single platform length:62.5" (1,590 mm)
Single platform width:22" (554 mm)
Overall length:165" (4,190 mm)
Overall width - Min:81.5" (2,072 mm)
Overall width - Max:87.5" (2,222 mm)
Lowered lift height:6" (152 mm)
Lifting time:45 seconds
Motor:208-240 VAC / 50-60 Hz / 1Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Bendpak MDS-6LP 6,000-lb. Capacity / Mid-Rise Scissor Lift / Open Center
The open-center design of the MDS-6LP makes it a clear leader in convenience and work productivity. Designed for home garages, full-service shops and quick-lube pits, and basically anyone who works on cars. This rugged mid-rise lift is also perfect for shops with low ceilings.
Bendpak 6,000-lb. Capacity / Mid-Rise Scissor Lift / Open Center
The open-center design of the MDS-6LP makes it a clear leader in convenience and work productivity. Designed for home garages, full-service shops and quick-lube pits, and basically anyone who works on cars. This rugged mid-rise lift is also perfect for shops with low ceilings.
The MDS-6 Series Revolution
This open-center mid-rise lift is a mechanical marvel. Decades of experience have taught us a thing or two about designing equipment to safely connect to virtually any vehicle's OEM lift points. A car lift with longer platforms means you get to lift more vehicle types than ever. Some well-meaning shops risk the personal safety and well-being of the vehicles they work on because their lifts don’t full reach those OEM jack points. BendPak's redesigned MDS-6LP corrects that problem once and for all with longer platforms. Its extended lift point spread means vehicles with long wheelbases can be safely raised in seconds flat.
Add or remove ramps at your leisure
Converting your low-rise lift to a flush-mount design is now easier than ever. Our design lets the ramps attach directly to the platform. This makes it easy to work on elevated vehicles, especially in the wheel well area. The approach ramps have slotted receivers and simply drop into place. They are easily removed by pulling upward for rapid disconnect from the frames.
Stronger lift from a collapsed position
The MDS-6LP mid-rise lift has a pivoting “kicker” mechanism that helps lift low ground-clearance vehicles. Unfortunately, some scissor have poor mechanical advantage when fully lowered. They have no lifting force until the frames rise a few inches. Our kicker is like having booster rockets for the first six inches of upward movement.
Four hydraulic cylinders
Your low-rise lift is no wimp. Four super-powerful hydraulic cylinders with a proprietary flow divider ensure the separate platforms remain level and efficient at all times. It takes mere seconds to get to the max rise. This lift also features the best electric-hydraulic technology the industry has to offer.
Solid-steel safety lock bars
As the platforms rise, locks automatically engage at several heights. This safety feature ensures two things: more versatile positions to work from and increased safety as the platforms rise. For your safety, hydraulics are not engaged when the safety arms rest on the mechanical locks. Once the lift moves, hydraulic pressure resumes.
Convenient stainless-steel pneumatic cylinders
Air cylinders replace spring releases on the MDS-6LP mid-rise lift. They make sure the locks release at the same time as the lift descends. Each cylinder need to be pressurized with a 50 PSI, 10-CFM air source at the time of installation. Any air compressor or hand pump will do the trick.
A push-button safety lock release system
Releasing the mechanical lock system is as easy as pressing a button. The locks deactivate instantly and the lift lowers completely in seconds flat. You’ve never seen a more convenient or easy-to-use lock release system.
Hinge-point features Zerk grease fittings
Zerk grease fittings are self-lubricating and long-lasting. They require minimal maintenance to ensure your car lift lasts for years without trouble. Spend your days working without the squeal of metal-on-metal. The MDS-6LP mid-rise lift practically maintains itself with these rugged fittings doing the work for you.
Durable, cushioned rubber contact blocks
BendPak rubber blocks are tough, hard and super-durable. Other companies offer little pads and small blocks that shred after heavy use. Not ours. They’ll last for years without issues. If you ever need replacements or want to order an extra set, give us a call! We’ll help get them shipped right to your door.
Three locking positions
The MDS-6LP and MDS-6LPF reach a comfortable 44.5” of rise with the lift blocks in place. More lock positions in a mid-rise lift makes it easier to manage your work. If you just need to get the wheels a few inches off the ground, use one of the lower settings. If you want to scoot under more comfortably, raise the lift to the top lock position. With BendPak, the choice is yours!
Detailed installation and maintenance instructions
Safety decals, the owner’s manual, lift point spread information and a safety placard for training purposes are all included for your convenience. Learn everything you can about your car lift, and teach others everything you know. They’ll be sure to pay it forward, maintain best safety practices and help keep your mid-rise lift working for years to come.
Choose flush-mount
If you’re looking to flush-mount your lift in the floor for a smooth sub-surface installation, be sure to choose the MDS‐6LPF flush-mount mid-rise lift. It features all the same features of the MDS-6LP but is more ideal if you want your lift to collapse perfectly parallel with your flooring.
NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick‐up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height, with the specifications shown before you purchase.
Features
- Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class
- Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity
- Solid‐steel safety lock bars engage automatically during ascent
- Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 psi, 10 CFM air source at time of installation.)
- A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles
- Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
- Comes standard with four durable cushioned‐rubber contact blocks, permitting fast vehicle setup
- Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
- Powder coat finish provides a long lasting durable finish
Specifications
Lifting capacity:6,000 lbs. (2,722 kg)
Lifting height:43" (1,093 mm)
Lifting height + blocks:45" (1,144 mm)
Lift platform dimensions:19" x 67" (484 mm x 1,701 mm)
Width between platforms:40" to 46" (1,018 mm to 1,168 mm)
Overall width:Adjustable
Overall length:92.6" (2,351 mm)
Lowered height:4.6 (116 mm)
Lifting time:35 seconds
Motor:110–220 VAC / 60 Hz / 1 Ph
Bendpak LR-60 6,000-lb. Capacity, Low-Rise Lift.
Get it Done Fast with a BendPak Low-Rise Lift
When you need a car lift to add versatility and productivity to your shop or garage, your first stop should always be BendPak. Simple, safe and rugged, this rubber-topped low rise lift can handle a mighty 6,000-lb. load without hogging your precious floor space. Plus, it happily fits into narrower bays. The LR-60 is the ideal solution for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. All in all, the LR-60 is perfect for servicing cars and light trucks. For even more adaptable versatility, the included solid rubber lift blocks can be positioned in a variety of pick-up points on unibody and frame-contact undercarriages. Just make sure that you compare your vehicle specifications, including ground clearance and overall height, with the specification tables below before you buy.
Always bet on BendPak for increased durability, safety and productivity. You aren't going to find comparable quality or value anywhere else—BendPak always bests the rest.
Need the same great compact lifting power on the go? Check out the portable LR-60P.
Low-profile height
The LR-60 is collapsible down to a mere 4”. Its profile makes it perfect for low-stance cars, as well as light trucks and SUVs. When space is tight, DIY’ers and shop owners agree that this lift offers incredible bang for their buck.
Single-point safety release
The single-point release feature on the control panel ensures that both locks release simultaneously. This ensures absolute safety. Combined with the ergonomic placement of the controls, this is the safety release style most preferred by professionals worldwide.
Experience state-of-the-art compact lifting convenience with BendPak's LR-60. This 6,000-lb. capacity scissor lift comes loaded with a multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame.
BendPak LR-6000 (LR-60) 6,000 lb. Capacity Low-Rise Specialty Lift
You haven't experienced state-of-the-art compact lifting convenience until you've used the BendPak LR-60. This 6,000-lb. capable lift comes loaded with an electric / hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame. Let the LR-60 take those vehicles and your service capabilities to new heights.
When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak. Simple, safe and rugged; this rubber-topped low rise lift can handle a mighty 6,000-lb. load without hogging your precious floorspace and can happily fit into narrower bays. The LR-60 is the ideal solution for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. All in all, the LR-60 is perfect for servicing cars and light trucks. For even more adaptable versatility, the included solid rubber lift blocks can be positioned in a variety of pick-up points on unibody and frame-contact undercarriages. Just make sure that you compare your vehicle specifications, including ground clearance and overall height, with the specification tables below before you buy.
Always bet on BendPak for increased durability, safety and productivity. You aren't going to find comparable quality or value anywhere else-BendPak always bests the rest. Need the same great compact lifting power on the go? Check out the portable LR-60P.
Every LR-60 comes with:
Low-profile design
A low 4" collapsed height accommodates most vehicles.
Single-point safety release
The single-point safety release and dead-man style operation controls make the LR-60 lift easy to operate and safe to use.
Dropped crossbar
A specially formed crossbar is dropped in the center providing added clearance for vehicle drive-over clearance.
Rugged steel channel frame
If you're going to do heavy lifting, you need a solid base.
Industrial-grade hydraulic cylinder
Integrated into the single hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.
Durable powder-coat finish
All low-rise lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.
Solid rubber lift blocks
Others charge extra for these necessary adapters, but they're standard with every LR-60 lift.
Detailed instructions
Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.
Features
- 6,000-lb. lifting capacity
- Electric / hydraulic power system
- Multi-position safety locks
- Rubber lifting blocks included
- Dropped cross bar for added clearance
- Heavy-duty steel channel frame
Lifting capacity: 6,000 lbs. (2,724 kg)
Max lifting capacity front axle: 3,000 lbs. (1,361 kg)
Max lifting capacity rear axle: 3,000 lbs. (1,361 kg)
Max lifting height: 26" (660 mm)
Max lift height + 1.5" blocks: 27.5" (699 mm)
Max lift height + optional 3" blocks: 29" (737 mm)
Overall pad length: 53" (1,346 mm)
Overall width: 70.5" (1,791 mm)
Overall length: 82" (2,083 mm)
Lowered height: 4" (102 mm)
Lifting time: 35 seconds
Motor: 110 VAC / 50-60 Hz / 1 Ph
Lift pad dimension: 18" x 52" (457 mm x 1,320 mm)
Shipping weight: 829 lbs. (376 kg)
Shipping dimensions: 72" x 83" x 20" (1,828 mm x 2,108 mm x 508 mm)
LR-60P 6,000-lb. Capacity / Low-Rise Lift / Portable
The LR-60P includes UHMW rollers that make this an incredibly portable and versatile scissor lift. It has all the same great features as the LR-60, including multiple safety locks, rubber lifting blocks, dropped crossbar and heavy-duty steel channel frame.
Bendpak LR-60P 6,000-lb. Capacity, Low-Rise Lift, Portable
6,000-lb. Capacity / Low-Rise Lift / Portable
The LR-60P includes UHMW rollers that make this an incredibly portable and versatile low-rise lift. It has all the same great features as the LR-60, including multiple safety locks, rubber lifting blocks, dropped crossbar and heavy-duty steel channel frame.
Choose "P" For Portable
High-density UHMW rollers make the LR-60P a conveniently portable low-rise lift. If you’re regularly shifting car lifts to different service bays or have limited space you need to diversify, a portable lift will make your garage operations that much easier. These amazingly durable wheels, and they're practically indestructible. One person can easily move the LR-60P around shops or garages, and the wheels should never wear or need replacing.
Low-profile height
The LR-60P offers portability without adding bulk. The lift collapses to just 4" high, so low-stance vehicles have no problem clearing the frame. This small-footprint model is not only ideal for tight spaces, but for garages with limited equipment that need to work in different places around the shop, or simply store the lift out of the way.
Single-point safety release
With the push of a button on the control panel, dual locks release on each frame of the LR-60P. The control panel keeps operators at a safe distance during descent, ensuring efficiency, peace-of-mind and a safe, smooth-running lift at all times.
Dropped crossbar
A dropped crossbar makes it easier to drive up and onto the frames. The center portion of each frame rises to engage the vehicle's OEM jacking points. Since the crossbar improves stability without slowing or hindering operations, Wheel service and suspension work become a cinch.
A steel channel runs along the base of the LR-60P. The added stability makes this an ideal lift for busy, active bays. With a five-year standard warranty and superior engineering put into the design, we guarantee you'll work without worry for as long as you own your BendPak.
Industrial-grade hydraulic cylinder
Integrated into the single hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass.
Solid rubber lift blocks
This portable low-rise lift includes a set of durable hard-rubber blocks. They take all the use and abuse you can throw at them for years of maintenance-free lifting. We don't even bother with or offer those thin, flimsy pads that damage your customers' vehicles or get torn to shreds after a few uses. If you ever need to get these blocks replaced, BendPak offers same-day delivery on most orders.
Features
- 6,000-lb. lifting capacity
- Tow handle makes it easy to move lift from bay to bay
- Electric / hydraulic power system
- Multi-position safety locks
- Rubber lifting blocks included
- Dropped cross bar for added clearance
- Heavy-duty steel channel frame
Specifications
Lifting capacity: 6,000 lbs. (2,724 kg)
Max lifting capacity front axle: 3,000 lbs. (1,361 kg)
Max lifting capacity rear axle: 3,000 lbs. (1,361 kg)
Max lifting height: 26" (660 mm)
Max lift height + 1.5" blocks : 27.5" (699 mm)
Max lift height + optional 3" blocks: 29" (737 mm)
Overall pad length:53" (1,346 mm)
Overall width: 70.5" (1,791 mm)
Overall length: 82" (2,083 mm)
Lowered height:4" (102 mm
Lifting time: 35 seconds
Lift pad dimension: 18" x 52" (457 mm x 2,591 mm)
Motor: 115/208-230 VAC / 50-60 Hz / 1 Ph
Shipping weight: 814 lbs. (370 kg)
Shipping dimensions: 82" x 70" x 20" (2,083 mm x 1,778 mm x 508 mm)
MaxJax M6K 6,000 Lbs Portable Car Lift - Standard Package
MaxJax M6K 6,000 Lbs Portable Car Lift - Standard Package
For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems.
Overview
The Patented One-of-a-Kind MaxJax® Portable Car Lift
Safety Features from the Ground Up
- No one in the industry has a more sophisticated and comprehensive research and quality control program than MaxJax, and our thousands of customers worldwide prove it.
- Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs.
- Hydraulic cylinders feature integrated velocity-fuse safety valves.
- A robust, gear-type flow divider precisely distributes hydraulic pressure providing consistent, equalized lifting.
- Rugged safety lock bars are capable of holding three-times the rated lifting capacity.
- Arm restraints automatically engage each time the lift is raised.
- Detailed installation, maintenance and safety instructions accompany each MaxJax car lift.
- MaxJax encourages all owners to know their equipment and to follow good safety practices when using any of our products. Your MaxJax car lift equipment has been designed and built with your safety in mind, but the ultimate responsibility for safe operation is with you, the operator.
MaxJax is protected by one or more patents or claims of patents in the U.S. and elsewhere. This is provided to satisfy the virtual patent marking provisions of various jurisdictions, including the virtual patent marking provisions of the America Invents Act, as codified in 35 U.S.C. § 287(a).
PATENT NO. US 8.256.577 B2 and PATENT NO. US 9.150.395 B2
Features
Benefits of the MaxJax
It's the features you get that set the MaxJax apart from the rest. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new car lift. Read through the long list of features this car lift has to offer and you'll easily come to the conclusion that the MaxJax is no ordinary garage lift.
MaxJax Advantages Compared to other Full-sized Two-post Lifts
Clear undercar access
No other low-rise or mid-rise lift system provides more under-car clearance and unobstructed floor space than the MaxJax lifting system. Now you can easily access engine undersides, transmissions, drive-shafts, starters, differentials or anything else requiring under-car access.
Portability
A two-post car lift with built-in wheels that allows you to use the lift when you need it, then conveniently store it out of the way when not in use keeping your garage and vehicle lanes clutter-free.
Setting Up and Working in Multiple Shop Bays with MaxJax
Stow to go in less than 15-minutes
Internally threaded recessed drop-in anchors and quick-connect/disconnect hydraulic couplers provide for fast and simple set-up. NOTICE: Before drilling into post-tension garage floors, always consult a building engineer for determining cable locations and where to avoid drilling.
Works like magic
A robust, gear-type flow divider is the heart of the MaxJax system, providing consistent, equalized lifting. The specially designed flow divider/combiner is a positive-displacement fluid control device which allows precise distribution of hydraulic power to both columns even if load balance or pressures change.
Mobile power unit cart
Our standard mobile power unit cart is small enough to be stored out of the way and features a storage area for the hydraulic hoses. The hydraulic power unit uses a single-phase motor that requires 110-volts AC and a 23 amp breaker. The industrial grade power cord is 6-Ft. long. A simple push-button switch raises the lift and a push lever controls the lowering. Simple quick-disconnect hoses can be positioned easily for single or dual column operation.
Adjustable lifting arms and stackable adapters
Increases overall arm positioning for lifting a variety of different vehicles that have Uni-body construction, OEM recommended pick-up points, or wide and/or narrow frame configurations.
Every MaxJax order includes four (4) medium height adapters and four (4) stackable standard lift pad adapters.
Tall adapters sets are an optional accessory
Low-profile arms
Fit under the lowest compact and sport vehicles or custom motorcycles with lowered frames.
Automatic arm restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear type arm restraints automatically disengage to provide easy positioning of the lift arms.
Maintenance-free slide blocks
Rather than using roller bearings that need constant lubrication and maintenance, we use futuristic full-floating UHMW ultra-high molecular weight polyethylene load bearings that never need lubrication and last virtually the life of the lift.
Single-piece columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Direct-Drive technology
By utilizing two low-pressure HVLP Direct-Drive cylinders, we've eliminated the need for lifting chains or screw mechanisms most commonly found on other lift designs. HVLP Direct-Drive technology offers better reliability, smoother operation and less maintenance.
Industrial-grade hydraulic cylinders
Integrated into every MaxJax® hydraulic cylinder is a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life.
Two lifts in one
Our optional motorcycle adapter kit allows you to safely lift motorcycles, ATV's or other motorized vehicles to a comfortable working height.
Specs
Lifting Capacity 6,000 lbs. (2,722 kg)
Max Load Per Arm 1,500 lbs. (680 kg)
A Height Overall 89.5" (2,273 mm)
B Height of Column 64" (1,626 mm)
C Min. Pad Height 4.5" (114 mm)
D Max Lift Height (Pad Only) 47.5" (1,207 mm)
E Max Lift Height (With 3" Adapter) 50.5" (1,283 mm)
F Arm Reach (Min - Max) 26" - 40" (660 mm - 1,016 mm)
G Typical Width (Outside of Base Plate) 105" - 135" (2,667 mm - 3,429 mm)
H Drive-thru clearance 74" - 104" (1,880 mm - 2,642 mm)
Locking Positions 7 (every 3")
Motor 110 VAC / 50-60 Hz. / 1 Ph. (23A Breaker)
Time of full Rise 45-secondsIndividual
Column Weight 300 lbs. (136 kg)
Shipping Weight (Standard Model) 980 lbs. (444 kg)
Shipping Dimensions (Standard Model) 68" x 39" x 35" (1,727 mm x 990.6 mm x 889 mm)
The design, material and specifications are subject to change without notice. The MaxJax is protected by one or more patents or claims of patents in the U.S. and elsewhere. PATENT NO. US 8.256.577 B2 - PATENT NO. US 9.150.395 B2.
Baseplate dimensions*
A 371 mm (14.5")
B 330 mm (13")
C 150 mm (6")
D 24 mm (1")
E 165.5 mm (6.5")
F 20 mm (0.75")
G 20 mm (0.75")
We are Master Auto Lift, Inc.
Our management staff has an average of 14 years of experience in the Automotive Equipment.