Dannmar DJ-6000 6,000 Lbs Rolling Bridge Jack
Dannmar DJ-6000 6,000 Lbs Rolling Bridge Jack
Dannmar’s DJ-6000W rolling bridge jack is built strong and sturdy with a 6,000 lb. lifting capacity. This bridge jack is specifically designed for use with a Dannmar’s four-post lift with standard runways and 12,000-lb. lifting capacity. The DJ-6000W provides you with the versatility and added access to raise the wheels off the runways of the vehicle lift.
Overview
Dannmar’s DJ-6000W Rolling Bridge Jack is the simple and safe way to turn your lift into a full-service car lift. With this Rolling Bridge Jack’s 6,000-lb. lifting capacity, you can take on even more types of vehicle repairs. Simply position the jack under the appropriate front or rear chassis area, and lift the vehicle up and off of the runways. Each chassis-engaging jack raises one-half of the vehicle, and two will raise all four wheels above the runways. Each four-post rolling bridge jack can be raised to three different heights. Locks engage automatically as the jack scissor arms raise, and they release simultaneously as the arms are lowered. Welded to the side of the rolling bridge jack, is a high-pressure, air-hydraulic pump that requires 125 psi and 10-20 CFM. It’s activated when you press a foot pedal attached to the unit.
Features
- 6,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters to maximize arm reach
- High-pressure commercial air-hydraulic power unit; foot operated
- Optional air-line kit
Specs
SKU# 5175325
Lifting Capacity 6,000 lbs. (2,722 kg)
Max. Height + Pad Only 16.5” (419 mm)
Max. Height + Pad + Adapter 20” (508 mm)
Min. Height + Pad Only 6.5” (165 mm)
Min. Height + Pad + Adapter 10” (254 mm)
Support Arm Width 35” (889 mm) - 45.5” (1,156 mm)
Max. Arm Reach 56” (1,422 mm)
Min. Arm Reach 42” (1,067 mm)
Motor Air-Hydraulic
Pump Noise 45 dB
Lifting Time 45 seconds
Shipping Weight 338 lbs. (153 kgs)
Shipping Dimensions24" x 42" x 14" (609 mm x 1,066 mm x 355 mm)