Dannmar D4-12 FOUR-POST LIFT
D4-12
FOUR-POST LIFT
Dannmar's D4-12 four-post extended runway lift is engineered to handle a 12,000 lb. lifting capacity and to provide the rugged durability your shop or garage needs. These are commercial-grade vehicle lifts from Dannmar and they have become the benchmark of quality throughout the industry. If you need another lift for repairs, or the ability to lift heavier vehicles, or simply a way to increase parking capacity (maybe that cool project car) this is the lift for you.
Overview
Dannmar’s four-post D4-12 lift is designed to work with most vehicles. With a 12,000 lb. capacity you not only know that it is capable of lifting most anything, but it also has to be built very strong, rugged, and durable. With Dannmar’s extended runways, moving onto the runway is safe and simple for vehicles of all sizes.
The quality built into each Dannmar lift is demonstrated by the Dual-hub cable sheaves that reduce stress, fatigue and wear. Huge 10.5” diameter cable sheaves within the runway and cross tubes combine with massive 2.25” diameter sheave axles. These larger components help to share the load, which dramatically decreases cable wear and increases critical component lifespan.
To help raise and lower the hefty 12,000 lb. load are a series of heavy-duty aircraft cables. The Dannmar D4-12 incorporates four, 1/2” diameter, stainless-steel lifting cables specifically designed for lifting applications. To keep everything moving freely, the Dannmar D4-12 utilizes built-in lubrication points located on each sheave and sheave axle.
Features
- CE Approved and Certified
- Meets or exceeds the standards prescribed by European Standard EN-1493
- Mid to long-style approach ramps for low-ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Heavy-duty 1/2” aircraft cable and 1.75” roller axles
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Large self-lubricating cable rollers
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- ETL approved
Specs
KU#5175317
Lifting Capacity 12,000 lbs. (5,443 kg)
A - Min. Runway Height 6.75" (171 mm)
B - Max. Rise 68.75" (1,746 mm)
C - Max. Lifting Height 77.5" (1,969 mm)
D - Ramp Clearance* (Max. Rise) 49" (1,245 mm)
E - Height of Columns 92" (2,337 mm)
F - Drive-Thru Clearance 98” (2,482 mm)
G - Overall Width 127.5" (3,239 mm)
H - Width Between Columns 115.75" (2,940 mm)
I - Overall Length 233.5" (2,940 mm)
J - Outside Columns 115.75" (2,940 mm)
K - Width Between Runways 34.5" (876 mm) or 41.5" (1,054 mm)
L - Runway Centerline54.5" (1,384 mm) or 61.5" (1,562 mm)
M - Outside Edge of Runways 74.5" (1,892 mm) or 81.5" (2,070 mm)
N - Runway Width20" (508 mm)
O - Length of Runways 194.75" (4,947 mm)
Min. Wheelbase @ Rated Capacity140” (3,556 mm)
Min. Wheelbase @ 75% Capacity120” (3,048 mm)
Min. Wheelbase @ 50% Capacity100” (2,540 mm)
Min. Wheelbase @ 25% Capacity80” (2,032 mm)
Locking Positions15 (spaced every 4” / 102 mm)
Time to Full Rise 60 seconds Motor 220 VAC / 60 Hz / 1 Ph*
Approach ramps can be removed.
The Dannmar D-12 Series™ is a new breed of uncompromising lifts. With a bold 12,000-pound capacity, this lift is ready to take on all the demanding tasks of a professional shop. Equipped with heavy duty, steel-braided, aircraft-quality cables - this lift has been over-engineered meticulously in order to transcend other competitive lifts on the market; creating a new standard of perfection in the industry. From the Tru™ Non-Skid Runway Grip, to the heavy-gauge reinforced-steel skeleton; the D-12™ will not fall short of extraordinary.
12,000 pound lifting capacity
Electric/hydraulic power system
Single hydraulic cylinder mounted underneath runway
Internal “Anti-Sway” slider blocks in each column
Features heavy-duty 1/2” aircraft cable
Oversized self-lubricating cable rollers
Rugged 1-3/8” roller axles
Multi-position safety locks in each column
Ramps feature non-skid surface
Push-button safety release
Runways adjust for different tread widths
Optional drive-thru ramps available
Optional rolling jacks available
Lifting Capacity: 12,000 lbs.
Overall Width: 130” / 3302 mm.
Outside Length: 205” / 5207 mm.
Overall Length: 235” / 5969 mm.
Height of Columns: 89” / 2260 mm.
Min. Runway Height: 7” / 178 mm.
Max Rise: 70” / 1778 mm.
Max. Lifting Height: 77” / 1956 mm.
Width Between Columns: 116” / 2946 mm.
Runway Width: 20” / 508 mm.
Width Between Runways: 32” - 43” 813mm.-1066mm.
Length of Runways: 198” / 5029 mm.
Locking Positions: 12
Lock Spacing: Every 4” / 102 mm.
Lifting Time: 60 Seconds
Standard Motor: 220 VAC / 60Hz. 1Ph