Master Auto Lift, Inc.
  • Home
  • Services
  • AUTO LIFT
    • 2 POST LIFT
    • 4 POST LIFT
    • ALIGNMENT LIFTS >
      • portable lift
    • PARKING LIFTS
    • quick jacks >
      • AIR COMPRESSORS
  • GARAGE EQUIPMENT
    • Floor Jacks
    • PIPE BENDERS
    • transmission/jack stand
  • Pipe Benders
  • >
  • BB-1 Blue-Bullet Bender with BB-1 Die Package

BB-1 Blue-Bullet Bender with BB-1 Die Package

SKU: BB-1
$7,775.00
$6,505.00
$6,505.00
Unavailable
per item

Meet the heavy-duty BendPak Blue-Bullet exhaust pipe bender. It takes off like a shot and helps you reach your production target every time. Includes the BB-1 die package and a dual-function end-finishing unit for precision OE expansions and flares.

Now you do have a choice. A bender that delivers superior performance at a highly competitive price. We took our standard bender and equipped it with a simple knee valve and degree plate combination. We made it simple but rugged, and oh yea, affordable. What more could you ask for? The knee operated valve gives you precise control and hands free bending capability with the convenience of trouble-free operation. Simply push the lever to the left to advance the bending die then to the right to retract it. Heavy duty cast iron construction means the valve will stand up to years of heavy use.


  • Quick-Change Bending Dies - Who has time to waste? Especially when you have a car in the air and others lined up. When we first came up with the idea of twist-lock tooling and quick-change bending dies others said it wouldn’t work. Well it did, and it still does. In fact it still does so well that others copied. Imitation really is the best form of flattery.

  • 180-Degree Bending Capacity - You say you have to bend deep. Well, how does a U-shape sound? Be sure to ask for our 180-Degree dies if you’re planning to bend more than 170 degrees. You’ll get perfect deep bends on a 5” radius without the pipe sticking or hanging up. That’s because we use an exclusive relief cut design on our bending dies that helps maintain the pipes uniformity throughout the bend cycle and eliminates excessive “crimping” or deformation.

  • 3” Bending Capacity - We’ve purposely built 3” bending capacity into every BendPak bender so that you can order three inch dies when you need them. Our three inch bending dies are a fine example of our commitment to quality. Sure there heavy, but take a close look at their design. We took ordinary bending dies and made them not so ordinary. No other manufacturer uses this exclusive step-cut process for the die rails that actually helps contain the larger size tubing better and gives you a more uniform bend. Not only can you bend three inch tubing but we’ve made it possible for you to expand it and flare it as well. We have all the dies you need to make your big tubing jobs small ones.

  • Long Stroke Bending Cylinder - Because every BendPak bender is equipped with an extended top cylinder, you no longer need to use pusher block extensions when bending with small radius dies. Also, because the 14” top cylinder can be retracted further, additional clearance is provided for changing dies or removing bent tubing.

  • Clampless Swager - All BendPak benders are equipped with our exclusive Clampless Swager which puts out an incredible force of over 30,000 pounds for quick and precise end forming. The Clampless Swager provides rapid set-up time and a high degree of accuracy for both I.D. and O.D. expansions, slip-fits, flares, ball-joints, reductions, and manifold flanges. All tooling is quick release. Take a close look at the clamp assembly. What you don’t see is a cumbersome, antiquated vise assembly to secure the tubing in the clamp area. What you do see is good old fashioned American ingenuity at it’s finest. The narrow hinged collars simple drop into position and allow you to flare tubing ends as close as 3” from a bend. Don’t worry about the clamps slipping either. The more pressure you put on the clamps the tighter they grip.

  • Internal Segment Expander - Our internal segment expander is just as unique as our Clampless Swager and can be used for both I.D. and O.D. expansions, slip-fits, flares, ball-joints, and manifold flanges. Our buttress canister has a single position setting for all I.D. expansions but can also be adjusted for special sizing requirements. A single arbor is used for all tubing sizes 1-1/2” - 3”.


With BendPak’s exclusive “Clampless Swager” and Internal Expander, you can easily perform all end finishing operations with ease. Reducing, Internal Swaging, Flares, Flat Flares, Ball Joints, Male Ball Joints, Female Sockets, Double Donut-Type Flares, and more. All tooling is quick release.


Our Blue-Bullet models are equipped with a double ended cylinder for both the clampless swager and segment expander. A single control handle operates the cylinder and is placed towards the middle so you can stand comfortably in one location and operate both sides.


  • Industrial-Grade Hydraulic Cylinders – Integrated into every BendPak bender are commercial-grade hydraulic cylinders that feature one-piece, pilot fitted, machined steel pistons wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. Our micro-smooth chrome-rods are machined from high yield, ground & polished C-1045/50 micro-alloy steel then plated to a minimum of .001˝ diametrically, to ensure superior cylinder operation and life. Specially designed, high durometer, mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper provides exclusion protection. Our welded cylinder bodies are made from high yield-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior design ensures straight, smooth and long duty life cylinders.

  • Durable Powder Coat Finish – All Pipe Benders feature a durable powder coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After, the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded conveyor line. The powder is then applied using an electrostatic spray gun. The powder “sticks” to the parts similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.


Our computer exhaust bend data covers over 10,000 applications. The simple computer program system guides you step-by-step when fabricating original equipment exhaust and tailpipes. Coverage includes domestic and light trucks as far back as 1965. 


Shipping Details


It is the buyer's responsibility to unload the freight at their location. BendPak will take no responsibility for additional charges of any kind that may incur related to, or involved with, the renting or acquisition of equipment of any kind necessary to unload items off of a delivering carrier's truck. Contact your BendPak dealer for shipping details.


  • Facebook
  • Twitter
  • Pinterest
  • Google+
Add to Cart
  • Description
  • Features and Specs
<
>
Picture
​Blue Bullet pipe bender logoWith its superior performance and simple operation, the Blue Bullet BB-1 exhaust pipe bender will hold a special place in your shop. We took our standard bender and equipped it with a knee valve and degree plate combination for a straightforward, rugged design that will never let you down. The knee operated valve gives you precise control and hands-free bending capabilities. Simply push the lever to the left to advance the bending die and then to the right to retract it. Heavy-duty cast iron construction guarantees that the valve will stand up to years of heavy use.

You're currently looking at the BendPak Blue-Bullet with the included BB-1 Standard Pipe Bender Dies Package. If you require extra tooling, consider the BB-2 version of this product.

 

Quick-change bending dies
Who has time to waste? Not you. Especially when you have a car in the air and others lined up. Our competitors tried for years to come up with an effective way to swiftly switch out the bending dies. But BendPak actually did it. Our twist-lock tooling and quick-change bending dies are so effective that they are copied across the entire industry. We choose to think of imitation as the best form of flattery, but you should make sure that you get your innovative equipment from the originator and not a knock-off.
 

180° bending capacity
You told us you needed a bender with an extremely deep bending capability. Is a U-shape deep enough? Thought so. Be sure to ask for our 180° dies if you're planning to bend more than 170°. You'll get perfect deep bends on a 5" radius, without pipe sticking or hang ups. That's because we use an exclusive relief cut design on our bending dies to help maintain the pipe's uniformity throughout the bend cycle and eliminate excessive crimping or deformation.

3" bending capacity
We built a convenient 3" bending capacity into every BendPak bender. In fact, our 3" bending dies perfectly exemplify our commitment to quality. Take a close look at the design. They might look like ordinary bending dies, but these heavy handfuls are anything but. No other manufacturer uses our exclusive step-cut process for the die rails. Our dies feature better-contained large-sized tubing and a more uniform bend. Despite the title of "bender," this unit is actually capable of expanding and flaring too! With a full range of dies to choose from, your big tubing jobs just got a whole lot smaller.

Long-stroke bending cylinder
Because every BendPak bender is equipped with an extended-top cylinder, you no longer need to use pusher block extensions when bending with small-radius dies. Also, the 14" top-cylinder can be retracted further, providing additional clearance for changing dies or removing bent tubing.

Clampless swager
All BendPak benders are equipped with our exclusive clampless swager which puts out an incredible force of over 30,000 lbs. for quick and precise end forming. The clampless swager provides rapid set-up time and a high degree of accuracy for I.D. expansions, O.D. expansions, slip-fits, flares, ball-joints, reductions and manifold flanges. All tooling is quick release. Take a close look at the clamp assembly. You won't see a cumbersome, antiquated vise in our clamp assembly. What you will find is American ingenuity at its finest—the narrow hinged collars simply drop into position and allow for flare tubing ends as close as 3" from a bend. Don't worry about troublesome slippage either. The more pressure you put on the clamps, the tighter they grip.

Internal segment expander
Our internal segment expander is just as unique as our clampless swager and can be used for I.D. expansions, O.D. expansions, slip-fits, flares, ball-joints and manifold flanges. The buttress canister has a single position setting for all I.D. expansions, but can also be adjusted for special sizing requirements. A single arbor is used for all tubing sizes 1-1/2" - 3". Combined, the clampless swager and internal expander let you easily perform all end-finishing operations with unparalleled ease: reducing, internal swaging, flares, flat flares, ball-joints, male ball-joints, female sockets, double-donut flares and more. The Blue-Bullet is equipped with a double-ended cylinder for both the clampless swager and segment expander. A single control handle operates the cylinder and is placed towards the middle, so you can stand comfortably in one location and operate both sides.

Industrial-grade hydraulic cylinders
Integrated into every BendPak bender are commercial-grade hydraulic cylinders that feature a single-piece, pilot-fitted, machined-steel piston, wrapped with specially designed, pressure-loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

Durable powder coat finish
All BendPak benders feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatically spray gun. The powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

Optional step-by-step digital user guide
Our exhaustive BendData program features over 10,000 bending applications. The simple computer program system guides you through every step of exhaust and tailpipe fabrication. Coverage includes domestic and light trucks as far back as 1965.





​
  • 2 separate end-finishing units at rear for all necessary flaring and expanding
  • Knee control and depth-of-bend degree plate for manual bending operations
  • BB-1 Tooling Package included
  • Comes complete with quick release bending and finishing dies
  • Includes high-speed clampless swager and internal expander
  • Easy-to-use drop-in collar makes swaging operations quick and efficient
  • Twist-lock tooling
  • Integrated power-relief control valve
  • Pass-through cylinder stem passes completely through the primary frame
  • Rigid 6" x 6" x 3/8" welded-steel tube frame
  • Commercial-grade hydraulic cylinders
  • All cylinders feature chrome-molly shafts, conforming to ANSI 92.2 standards
  • Quick-release bending dies for reduced set-up times
  • Bending heads precision grounded to within .002"
  • Enclosed controls keep your bending area clutter-free
  • 2-1/2" oversized barrel shafts for maximum dependability and minimum maintenance
  • Standard grease fittings allow for simple lubrication
  • NEMA rated on / off switch box incorporates overload relays that automatically disrupt power supply should an unforeseen over-current situation occur
  • Pressure gauges let you know exactly what the system pressures are at all times
  • Industrial grade casters help you easily move the bender around your shop
  • Adjustable pressure valve located right up front
  • One piece barrel ensures that the bending gates stay perfectly aligned with the ram
  • Heat-treated tooling for greater service life
  • Convenient tool trays keep your tooling organized
  • Strong, 5 Hp Baldor energy efficient motor delivers maximum performance
  • Direct-drive, high-speed, 4 gpm pump
  • Single enclosed bottom cylinder applies pressure evenly to the back gates and, because it is hidden, does not interfere with the tubing
  • Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination
  • Canister oil filter in the hydraulic system keeps the oil nice and clean
  • Oil sight-gauges allow you to visually inspect oil levels
  • Over-sized 1/2" high-pressure hose provides better speed and cooling
  • Open-sided swager box allows for easier access and reduces the chance of "crashing" tools and damaging the cylinder
  • 180° bending die available

Picture
  • Bending controls: manual / knee lever
  • Expander controls: manual / knee lever
  • Frame style: 1302 / double-ended expander
  • Maximum bending radius: 5" / 127 mm
  • Minimum bending radius: 3-1/3" / 89 mm
  • Maximum tube capacity: 3" / 76 mm / .095 wall
  • Standard die pack (BB-1): 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2"
  • Top cylinder working force: 60,000 lbs. / 27,216 kg
  • Hydraulic filter: canister
  • Dimensions: 42" x 62" x 31" / 1,067 mm x 1,575 mm x 787 mm
  • Standard motor: 5 Hp / 208 - 230 VAC / 60 Hz / 1 pH
  • Shipping weight: 1,264 lbs. / 573 kg
  • Shipping dimensions: 48" x 70" x 30" / 1,219 mm x 1,778 mm x 762 mm
  • Home
  • Services
  • AUTO LIFT
    • 2 POST LIFT
    • 4 POST LIFT
    • ALIGNMENT LIFTS >
      • portable lift
    • PARKING LIFTS
    • quick jacks >
      • AIR COMPRESSORS
  • GARAGE EQUIPMENT
    • Floor Jacks
    • PIPE BENDERS
    • transmission/jack stand