BENDPAK PLT-6S 6,000-LB. CAPACITY, TWO-POST TILT PLATFORM CAR STACKER PARKING LIFT
BendPak’s PLT-6S parking lift was designed for both commercial and residential use and is the perfect car parking solution when ceiling clearances are limited and vehicle heights are restricted. Each PLT-6S parking lift features dual hydraulic lifting cylinders a high-strength safety lock system.
Hydraulic Power that Frees You from the Chains
Not only that, but hydraulic lift systems are extraordinarily safe. While it’s extremely rare for anything to go wrong on a BendPak car lift, cables are the most common culprits when it comes to malfunctioning lifts. Take away the chain/cable system and you eliminate most of the moving parts of your parking lift, as well as many of the problems you could potentially encounter. With 6,000 lbs. of hydraulic lifting power, the PLT-6S is sure to be one of your favorite lifts
There’s no point in designing a parking lift that’s too big to fit in most garages. Even garage spaces with low ceilings can accommodate the PLT-6S, and in fact, many people turn to us because they want the same quality and service record BendPak offers on our other car lifts. After all, we have a reputation and we’re not afraid to use it.
Dual hydraulic cylinders
Forget the chain-over lift. Forget the cables and cable sheaves. While many of our lifts feature these systems, and they’re incredibly safe the way we’ve designed them, it’s sometimes nice to let the hydraulics do all the work. An integrated flow divider prevents the cylinders from ever collapsing: in a worst-case scenario (i.e., hose rupture), the fluid will slowly leak out of the cylinder(s) and the lift will gradually descend to the ground. However, this can’t happen once the lift is locked in place, so you and your vehicles—top and bottom—are completely safe at all times with this parking lift.
Automatic safety locks
Multiple lock points let you decide how high to park your lift. Your vehicles are equally safe at any point of engagement, and the locks release when the lift is lowered. Hydraulic pressure controls the platform and ensures a balanced descent.
Style:Two-Post Parking LiftCapacity
Lifting Capacity:6,000 lbs. (2,722 kg)
Overall Width98.3” (2,497 mm)
Overall Length153.5” (3,899 mm)
Overall Height74” (1,880 mm)
Platform Width79.1” (2,010 mm)
Platform Length134.9” (3,427 mm)
Platform Rise50.6” (1,286 mm)
Ramp Rise62.9” (1,599 mm)
Leg Length98.8” (2,509 mm)
Lifting Time55 seconds
Standard Motor220 VAC / 60 Hz / 1Ph
6,000 pound lifting capacity
- Ideal for garage storage
- Accommodates all cars and smaller SUVs
- Heavy steel locks automatically engage at full-rise
- Manually operated lock release
- Dual hydraulic lifting cylinders
- Cantilevered design with lateral torsion bar
- No chains or cables
- Individual, or single multi-unit power unit configurations
- For commercial or residential applications
- Manually operated lock release
- Hydraulic safety valves (velocity fuses)
- Available in 110V or commercial 220V power options
Typical Ceiling Heights
• Two Compact Cars 114" / 2896 mm.
• Two Full Size Cars 10’0”120" / 3048 mm.
• One Full Size Car / One SUV 138" / 3505 mm.
Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.