HDS-35X 35,000-lb. Capacity Extended-Length Four-Post Truck Lift
This incredible four-post truck lift handles Class 8 - 9 trucks, buses and military craft. Extended-length vehicles have 323" of runway to work with, which is perfect for virtually everything in this weight class.
Our Extended-Length 35,000-lb. Truck Lift
Get ready to lift some massive vehicles. If you need a 35,000-lb. capacity truck lift with significantly extended runways, the HDS35X is just the ticket to smoothly handle wide wheel bases, extended dimensions and virtually every truck in this weight class. Roadside truck repair stations and full-sized commercial fleets want to be ready for virtually anything. Government contractors should consider this lift for military applications. Tanks and military transport vehicles are some of the most valuable machines in the world, and we're proud that our nation's private shops, as well as government entities, routinely trust the nation's finest with BendPak's best.
Massive 323" runways are ideal for commercial fleets of all kinds. There aren't many semis or military land crafts that this lift can't accommodate. Most shops won't have a machine this size in the bay, so if trucks are in your wheelhouse, this car lift will set you apart from the rest.
Dual-hub cable sheaves
We put all our engineering prowess into keeping the HDS35X. After all, this is an incredibly heavy-duty lift, and on top of that, the runways are much longer than the ones on our standard-length model. To relieve pressure of the columns and ensure years of reliable lifting (decades, in many cases), BendPak utilizes 12" diameter cable sheaves with 4" axles. At that size, they're unlikely to wear out or ever need maintenance.
Large base plates
Our heaviest-duty 12" x 12" base plates handle all 35,000 lbs. of daily stress we expect you to put on this truck lift. Wider bases reduce stress put on the columns, and we promise to match the superior lifting power you need with the sturdiest structure money can buy.
Spring-loaded safety locks
Auto-engaging locks click into place as the lift rises. All locks connect simultaneously, thanks to a built-in flow divider that moves the platforms evenly. With the push of a button, all locks release together for a safe descent.
Secondary lock system
A secondary cable-slack detection system activates the moment slack is detected in the cables, safely stopping and locking the platforms in place until operators can figure out what's wrong. Of course, these failures are practically unheard of when lifts are properly used and maintained. We don't want here to be any question that the HDS35X offers best-in-class power and safety standards. Many other "top" brands don't even both with secondary safety locks, sadly.
Rolling bridge jacks
The RBJ25000 is an incredibly powerful bridge jack that hoists up to 25,000 lbs. in just a few easy pumps. Massive trucks and commercial vehicles are often unbalanced—their centers of gravity aren't dead-center on the vehicles. We over-engineered this jack to ensure that operators can safely lift an entire semi-truck with just two jacks, without straining the jack, your back or dropping the truck.
- 35,000-lb. lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Extended-length runways
- Supersized 12" diameter cable sheaves
- Stainless steel lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
- 12" x 12" base plates
- Non-skid runways
- Optional rolling jacks
Lifting Capacity*35,000 lbs. (15,876 kg)
*Max Capacity / Front Axle17,500 lbs. (7,938 kg)
*Max Capacity / Rear Axle17,500 lbs. (7,938 kg)
A - Min. Runway Height:8.5" (216 mm)
B - Max. Rise:60" (1,524 mm)
C - Max. Lifting Height:68.5" (1,740 mm)
Time to Full Rise:75 secondsOutside Dimensions
D - Overall Width:154" (3,912 mm)
E - Outside Length:317" (8,052 mm)
F - Overall Length:357" (9,068 mm)
G - Height of Columns:93" (2,362 mm)Inside Dimensions
H - Width Between Columns:134" (3,404 mm)
I - Drive-Thru Clearance:109" (2,769 mm)Runways
J - Runway Width:28" (711 mm)
K - Length of Runways:323" (8,204 mm)
L - Width Between Runways:36" (914 mm) or 47" (1,194 mm)
M - Runway Centerline:64" (1,626 mm) or 75" (1,905 mm)
N - Outside Edge of Runways:92" (2,337 mm) or 103" (2,616 mm)Minimum Wheelbase
Rated Capacity:230" (5,842 mm)
75% Capacity:195" (4,953 mm)
50% Capacity:165" (4,191 mm)
25% Capacity:130" (3,302 mm)Locking
Locking Positions: 9
Lock Spacing:Every 6" (152 mm)Power Unit
Motor:220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201.
Features and Specs
Looking for even more lifting capabilities? Check out the 40,000-lb. capacity HDS-40 or the extended 40,000-lb. capacity HDS-40X.
All HDS-35X extended length truck lifts feature:
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
Supersized 12” diameter cable sheaves within the runway and cross tubes combined with massive 4” diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll increase safety and spend less money in service related expenses down the road.
BendPak's HDS-Truck Series lifts feature four stainless-steel lifting cables that provide a great balance between abrasion resistance and fatigue.
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
Each HDS-Truck Series four-post lift is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-durometer rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service.Leak proof cylinder technology only available for BendPak four-post lifts
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.
Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
A maintenance-free electric hydraulic power system assures ultimate dependability.
All operator controls are conveniently located within easy reach.
12" x 12" base plates provide a solid foundation.
Non-skid runways provides maximum grip, even when the runway surface is wet or oily.
Optional rolling jacks make a great addition to increase service capacity. Rolling jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and break service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump.
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Extended length runways
Supersized 12" diameter cable sheaves
Stainless steal lifting cables
Single hydraulic under-runway cylinder
Integrated flow restrictor
Durable powder coat
Spring-loaded safety locks
Second lock system on constant guard
Fully enclosed lifting cables
Multiple adjustable height locking positions
Maintenance-free electric hydraulic power system
Conveniently positioned operator controls
12" x 12" base plates
Optional rolling jacks
*Max capacity / front axle: 17,500 lbs. / 7,938 kg
*Max capacity / rear axle: 17,500 lbs. / 7,938 kg
Overall width: 154" / 3,912 mm
Outside length: 317" / 8,052 mm
Overall length: 357" / 9,068 mm
Height of columns: 93" / 2,362 mm
Runway min height: 8-1/2" / 216 mm
Max rise: 60" / 1,524 mm
Max lifting height: 68-1/2" / 1,740 mm
Width between posts: 134" / 3,404 mm
Runway width: 28" / 711 mm
Width between runways: 36" – 47" / 914 mm – 1,194 mm
Runway centerline: 64" - 75" / 1,625 mm to 1,905 mm
Outside edge of runways: 92" - 103" / 2,367 mm - 2,616 mm
Drive-thru clearance: 109" / 2,769 mm
Length of runways: 323" / 5,842 mm
Min wheelbase @ rated capacity: 230" / 5,842 mm
Min wheelbase @ 75% capacity: 195" / 4,953 mm
Min wheelbase @ 50% capacity: 165" / 4,191 mm
Min wheelbase @ 25% capacity: 130" / 3,302 mm
Locking positions: 9
Lock spacing: every 6" / 152 mm
Lifting time: 75 sec
Motor: 220 VAC / 60 Hz / 1 Ph