BendPak HD-14T Tall Four Post Car Lift, 82" Rise 14,000 lb. - New Gray
The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 lbs. worth of automobile into the air without breaking a sweat.
More Height in a 14,000-lb. Lift
The HD-14T offers superior lifting power with an extended 82” rise, which means if we were a clothing warehouse, this car lift would be found in our “big and tall” section. Commercial fleets of trucks and vans will be right at home in your service bay with this model. Impress your customers by accommodating a wider variety than the competition, no matter what vehicles they bring in.
Extended runways
Longer runways are necessary for heavy-duty lifts. This four-post lift boasts runways long enough to handle large trucks and SUVs. Plus, longer runways prevent damage to the vehicle; we also extend the approach ramps in order to protect the bottom-front of the chassis.
Dual-hub cable sheaves
BendPak cable sheaves are huge: 10.5” diameter sheaves and 2.25” diameter sheave axles, all kept within the runway and cross tubes. This cuts down on how much time and cash you have to spend on maintenance and general upkeep.
Heavy-duty aircraft cable
Each BendPak lift in this series features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have an incredible breaking strength of over 14,000 lbs. each.
Built-in lubrication
Grease fittings on the sheaves and sheave axles ensure proper lubrication for these critical parts.
Flow restrictor
Keeping the runways level during rise is arguably the most important part of lifting a car. That’s why BendPak insists on upholding the best safety standards in the industry. The integrated flow restrictor ensures a slow, controlled descent in the very rare case of hydraulic hose failure.
Large base plates
10" x 12" base plates keep this four-post lift safe, stable and always ready for service.
Spring-loaded safety locks
Automatic locks activate as the runways rise. Adjustable safety ladders make sure the ramps are level, even if there is a slight slope in the garage flooring. This incredibly useful safety precaution adds to the versatility of the lift.
Push-button pneumatic lock release
With the push of a button, a pneumatic (air-powered) lock release lets operators lower the lift with ease. Aircraft-quality stainless steel and aluminum pneumatic cylinders are the most durable and trouble-free you’re bound to find on a car lift.
Secondary lock system
The all-important backup slack-cable detection system comes standard on this four-post lift (as well as every other lift we make). Others don’t have it. We refuse to leave you without it. Peace-of-mind is everything in the lifting business, so we give it in spades.
Integrated design
Hidden internal components keep them protected from environmental damage, as well as human interference.
Adjustable height locking positions
Fully adjustable, multiple lock positions let you work at the height most convenient for you.
Electric-hydraulic power system
Let the power system do the lifting while you worry about the work. A dependable, zero-maintenance system keeps all controls right at your fingertips.
Non-skid runways
The runways of the HD-14T four-post lift grab your wheel securely, so when you put your vehicle in park and tell it to stay put, it stays put.
Longer approach ramps
The longer the approach ramp, the easier it is to load low-stance cars. High-clearance trucks and SUVs don’t usually have this concern, but we’re sure to keep your lift as versatile as possible.
Flexible protective conduit
ALI-certified cabQle tubing protects against electric shocks. It also prevents wear and tear that occurs over time. Unprotected cables are a serious concern, and BendPak takes away the worry with our flexible, non-metallic tubing.
Rolling bridge jacks
We recommend the optional 7,000-lb. capacity rolling jack (model RJ-7), so you can perform wheel service on your lift. These frame-engaging jacks lift the vehicle off the four-post lift’s runway. Two jacks used together will let you raise all four wheels off the car lift at once!
Features
- 14,000-lb. lifting capacity
- Extra lift height
- Long-style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Hardened-steel sheaves with self-lubricating bearings
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- Optional RJ-7 air-hydraulic bridge jacks increase service capability
Capacity
Lifting Capacity* 14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)
Rise
A - Min. Runway Height: 7.625" (194 mm)
B - Max. Rise: 82" (2,083 mm)
C - Max. Lifting Height:86.5" (2,197 mm)
Time to Full Rise:65 seconds
Outside Dimensions
D - Overall Width: 126" (3,200 mm)
E - Outside Length:205" (5,207 mm)
F - Overall Length: 234" (5,944 mm)
G - Height of Columns:101" (2,565 mm)
Inside Dimensions
H - Width Between Columns:115.5" (2,934 mm
)I - Drive-Thru Clearance: 98" (2,489 mm)
Runways
J - Runway Width:20" (508 mm)
K - Length of Runways:191" (4,851 mm)
L - Width Between Runways:37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:77.5" (1,969 mm) or 91" (2,311 mm)
Minimum Wheelbase
Rated Capacity: 140" (3,556 mm)
75% Capacity: 120" (3,048 mm)
50% Capacity:100" (2,540 mm)
25% Capacity: 80" (2,032 mm)
Locking
Locking Positions: 16
Lock Spacing: Every 4" (102 mm)
Power Unit
Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list.
The industrial-quality HD-14T is a high lift solution that provides 82” of rise – that’s more headroom under and around the lift work area for tall technicians looking to reduce painful head knocks. Not only is the HD-14T great for service work, it doubles as a high-clearance parking solution as well when you need store vehicles underneath. It’s just another way that BendPak tailors our lifts to suit your needs. With this four-post lift, you can push 14,000 pounds worth of rolling stock into the air without breaking a sweat. Be sure to consider BendPak’s RJ-7 air-hydraulic bridge jacks and our convenient rolling oil drain pan to increase the service capability even more.
BendPak's HD-Series 4-post lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. In particular, this HD-14T is the kind of sturdy beast you want as the backbone of your shop or garage. Designed into every HD-Series lift is a laundry list of key features as long as your arm to ensure that BendPak is the absolute best you can buy. Our competitors might say we overdo it, but we don't include components for the sake of frills and flash. We design our lifts with the attributes we feel should come standard with every lift—the kind of lift we would want to (and do) own. You can always count on BendPak lifts for increased durability, safety and productivity. Spend less time worrying about what you're working under and more time doing what you love. Our commercial-grade lifts are second to none and recognized the world-over as benchmarks of dependability and quality. Heck, it's how we got our slogan.
The HD-14T is the extra-tall model in the HD-14 series, meaning that it gives you an extra foot of lifting height over its shorter brethren. If you are looking for the same great lifting power but with a shorter lifting height and variable ramp sizes, consider the HDS-14 or the HDS-14X.
Dependable design
Four heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
Dual-hub cable sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.
Multi-level locking positions
The HD-14T is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Heavy-duty aircraft cable
Each lift is supplied with four high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 411% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.
Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Single hydraulic cylinder
Leak proof cylinder technology only available for BendPak four-post lifts
Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001” diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.
Durable powder-coat finish
All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.
Non-skid runways
Gives you maximum grip, even when the runway surface is wet or oily.
Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
Longer approach ramps
These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It’s the little bit that makes a big difference.
Automatic safety locks
Aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.
Extra lift height
Long-style approach ramps for low ground clearance vehicles
Runways include rail-kit for optional accessories
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal anti-sway slider blocks in each column
Pneumatic push-button safety release
Features heavy-duty 1/2" aircraft cable
Safety locks enclosed in columns minimize pinch points
Hardened-steel sheaves with self-lubricating bearings
Mult-position safety locks in each column
Customizable power unit location
Approach ramps incorporate built-in rear-wheel chocks
Independent backup slack-cable safety latches
Runways feature non-skid surface
Optional RJ-7 air-hydraulic bridge jacks increase service capability
*Max capacity / front axle: 7,000 lbs. / 3,175 kg
*Max capacity / rear axle: 7,000 lbs. / 3,175 kg
Overall width: 126" / 3,192 mm
Outside length: 205" / 5,205 mm
Overall length: 234" / 5,927 mm
Height of columns: 101" / 2,543 mm
Runway min height: 7-5/8" / 192 mm
Max rise: 82" / 2,083 mm
Max lifting height: 89-5/8" / 2,276 mm
Width between posts: 115-1/2" / 2,938 mm
Runway width: 20" / 508 mm
Width between runways: 37-1/2" – 51" / 952 mm – 1,295 mm
Length of runways: 191" / 4,851 mm
Min wheelbase @ rated capacity: 135" / 3,429 mm
Min wheelbase @ 75% capacity: 115" / 2,921 mm
Min wheelbase @ 50% capacity: 100" / 2,540 mm
Min wheelbase @ 25% capacity: 80" / 2,032 mm
Locking positions: 16
Lock spacing: every 4" / 102 mm
Lifting time: 65 seconds
Motor: 220 VAC / 60 Hz / 1 Ph