D4-12A ALIGNMENT LIFT
D4-12A
ALIGNMENT LIFT
Dannmar’s D4-12A 12,000 lb. capacity alignment lift utilizes industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance.
Overview
Dannmar’s 12,000 lb. capacity alignment lift is two lifts in one. That’s because it works as an alignment system and a car lift. Dannmar’s utilized industrial-strength slip plates and turn plates into the runways to provide optimal results. With this, the wheels respond to every adjustment with effectively no resistance.
This is the sturdy alignment lift for most shops, especially if you service large, low ground-clearance vehicles. Dannmar’s alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with free-floating and no resistance.
Dannmar’s D4-12A four-post alignment lift utilizes multi-caster slip plates in the rear and turn plates in the front that allow for very precise alignments. These turn plates also provide more clearance for equipment installations. The lift can otherwise be used for most repairs and vehicle or light to medium weight truck storage. With a lift like the Dannmar D4-12A, shops can free up extra floor space or increase parking capacity.
The Dannmar D4-12A alignment lift comes standard with robust 10.5” diameter dual-hub cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles. A heavy-duty 1/2” diameter aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions from weather, chemicals, and hydraulic oil. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service. Other features include electric/hydraulic power, push button pneumatic lock release, adjustable height locking positions, an optional rolling bridge jack, and more.
Features
- 12,000 pound lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Heavy-duty turn plates and integrated rear slip-plates
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1-3/8” roller axles and oversize self-lubricating cable sheaves
- Multi-position safety locks in each column with push-button safety release
- Runways adjust for different tread widths and feature non-skid surface
- Optional 6,000-lb. capacity bridge jacks available
Specs
SKU#5175318
-Lifting Capacity12,000 lbs. (5,443 kg)
-Min. Runway Height 9.5" (243 mm)
-Max. Rise 68.75" (1,746 mm)C
-Max. Lifting Height 79.5" (2,019 mm)
-Ramp Clearance* (Max. Rise) 49" (1,245 mm)
- Height of Columns 92" (2,337 mm)
- Drive-Thru Clearance98” (2,482 m)
- Overall Width127.5" (3,239 mm)
- Width Between Columns 115.75" (2,940 mm)
- Overall Length 233.5" (2,940 mm)
- Outside Columns115.75" (2,940 mm)
- Width Between Runways 34.5" (876 mm) or 41.5" (1,054 mm)
- Runway Centerline54.5" (1,384 mm) or 61.5" (1,562 mm)M - Outside Edge of Runways74.5" (1,892 mm) or 81.5" (2,070 mm)
- Runway Width20" (508 mm)
- Length of Runways 194.75" (4,947 mm)Min.
-Wheel Alignment106” (2,692 mm)
Max. 4-Wheel Alignment158.5” (4,026 mm)
Max. 2-Wheel Alignment163.5” (4,153 mm)
Min. Wheelbase @ Rated Capacity140” (3,556 mm)
Min. Wheelbase @ 75% Capacity120” (3,048 mm)
Min. Wheelbase @ 50% Capacity100” (2,540 mm)
Min. Wheelbase @ 25% Capacity80” (2,032 mm)
Locking Positions 15 (spaced every 4” / 102 mm)
Time to Full Rise 60 seconds
Motor 220 VAC / 60 Hz / 1 Ph*
Approach ramps can be removed.
Multi‐caster slip plates in the rear provides precise free‐floating movement to prevent preload of the suspension during alignment procedures.
Durable front radius plates come standard and provide a fast and accurate measurement.
Multiple radius plate locations allow you to position the radius plates where best suited to providing better clearance from lift columns or lift front cross beams.
1/2" galvanized aircraft cables for greater lifting capacity.
Equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. Also eliminates any opportunity for vehicle door or mirror damage.
Integrated hydraulic flow restrictor provides controlled descent in the unlikely event of an unexpected hose rupture.
A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
Spring‐loaded safety locks automatically engage continuously during rise.
Adjustable safety ladders allow for precise runway leveling even when installed on sloped floors. Features multiple adjustable height locking positions for variable height parking and infinite leveling.
Push‐button pneumatic lock release makes lowering operations simple and fast.
Equipped with a redundant secondary lock system acts as a slack‐cable device in the unlikely event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.
A maintenance‐free electric hydraulic power system assures ultimate dependability.
All operator controls are conveniently located within easy reach.
Large base plates provide a solid foundation.
Non‐slip runway surface provides maximum grip even when wet or oily.
Lifting Capacity* 12,000 lbs. / 5443 Kg.
Max Capacity / Front Axle 6,000 lbs. / 2722 Kg.
Max Capacity / Rear Axle 6,000 lbs. / 2722 Kg.
Overall Width 130" / 3302 mm.
Outside Length 205" / 5207 mm.
Overall Length 248” / 6311 mm.
Height of Columns 89” / 2260 mm.
Min. Runway Height 9" / 228 mm.
Max. Rise 66” / 1676 mm.
Max. Lifting Height 75” / 1905 mm.
Width Between Columns 116" / 2946 mm.
Runway Width 20" / 508 mm.
Width Between Runways (*) 43" ‐ 51" / 1092 mm. – 1295 mm.
Length of Runways 191" / 4851 mm.
Min. 4‐Wheel Alignment (**) 98.3" / 2496 mm.
Max. 4‐Wheel Alignment (**) 150.787" / 3829 mm.
Max 2‐Wheel Alignment (**) 150.787” / 3829 mm.
Min. Wheelbase @ Rated Capacity 140" / 3556 mm.
Min. Wheelbase @ 75% Capacity 120" / 3048 mm.
Min. Wheelbase @ 50% Capacity 100" / 2540 mm.
Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
Locking Positions 13
Lock Spacing Every 4" / 102 mm.
Lifting Time 60 Seconds
Standard Motor (***) 208‐230VAC / 60 Hz. 1Ph